VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93
VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93
VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93
VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93
Clique para ampliar
  • Montagem garantida

    Sempre a parte correta

  • Especialistas internos

    Conhecemos nossos produtos

  • Valor adicionado

    Montagem, Balanceamento

  • Entrega em todo o mundo

    Frete grátis em todas as encomendas

VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93

2 vendido no último 8 horas
VRSF
Em estoque
$579.99
Featured on the world record holding 1100whp N54. 2007 – 2012 BMW 135i/335i/335is N54 & N55...
Guia de tamanho
$579.99

os clientes estão visualizando este produto
VRSF 1000whp 7.5″ Stepped Race Intercooler FMIC Upgrade Kit 07-12 135i/335i N54 & N55 E82 E90 E92 E93

Featured on the world record holding 1100whp N54.

2007 – 2012 BMW 135i/335i/335is N54 & N55 Stepped 7.5″ Race Intercooler Upgrade Kit

Replace your overheated factory intercooler with the VRSF 7.5″ Race Intercooler Kit to get the most out of your N54 or N55. We designed this kit to be one of the best performing intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price point. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

Intercooler Core

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heat soak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

We remedy this problem with our ultra high density 1100hp custom bar and plate core design which utilizes a staggered and offset internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. This intercooler was specifically designed for upgraded turbo cars running larger twin turbos or single turbos. Our 7.5″ FMIC has been involved in many record breaking builds and is currently featured on Motiv’s world record breaking, highest horsepower N54 @ 1100WHP.

Finish & Construction

Our VRSF intercooler features CFD backed, cast aluminum end tanks for improved flow in comparison to sheet metal end tanks. Our one piece seamless cast end tanks are also more durable than comparable sheet metal or multiple piece end tanks. Every VRSF intercooler is finished in a beautiful, uniform, bright silver coating which helps protect the intercooler from corrosion and ensures your VRSF intercooler holds up to the elements, no matter where you live.

Every VRSF product includes our lifetime warranty & our “No Hassle” satisfaction guarantee which includes fitment & defects.

Installation

All VRSF intercoolers feature tabs that allow the retention of the factory fan shroud. We include everything required to replace the OEM intercooler, including custom molded couplers and stainless steel t-bolt clamps necessary for installation. The race intercooler requires trimming of the black plastic shroud behind the bumper. The bumper does not require trimming. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.

Features

  • High density bar & plate core.
  • Lower charge pipe, couplers, clamps and mounting hardware included.
  • CFD engineered cast aluminum end tanks.
  • Easy install, less than 2.5 hours.
  • Includes lifetime warranty.

Fits the following BMWs

2008-2011 E82 BMW 135i
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is

 

Mostrar mais
Mostrar menos

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.

Política do retorno

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut brandit risus. Donec mollis nec Tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nastur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesco congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada famas ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proína em lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Mecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspender um nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Envio

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut brandit risus. Donec mollis nec Tellus et Rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nastur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesco congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada famas ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proína em lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Mecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspender um nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Use texto sobreposto para dar aos clientes uma visão sobre sua marca. Selecione imagem e texto relacionados ao seu estilo e história.

É sim.

Certifique-se de seguir as etapas abaixo:

1/ Baixe o pacote em themeforest.net (o arquivo está em formato zip)

2/ Extraia o arquivo que você acabou de baixar.

3/ Encontre este arquivo: ella-3.0.0-sections-ready.zip na pasta Ella Sections Ready 3.0.0, então você só precisa fazer upload do arquivo ella-3.0.0-sections-ready.zip para sua loja Shopify.

Para economizar seu tempo e entrar em contato com nosso suporte rapidamente, siga as etapas abaixo:

1/ Crie uma conta de equipe para nós (com permissão de Temas e permissão de Configurações) http://docs.shopify.com/manual/settings/account/staff-members

2/ Capture uma captura de tela ou vídeo do problema que você encontrou.

3/ Especifique qual modelo e versão você está usando.

4/ Descreva claramente como reproduzir o problema.

5/ Envie todas as informações (conta da equipe, captura de tela, vídeo, nome e versão do modelo, descrição dos problemas, link) para support@halothemes.com

Sim, iremos ajudá-lo a instalar o modelo, se necessário

Sim nós fazemos. Por favor, envie seus pedidos de personalização para support@halothemes.com , nós lhe daremos nosso orçamento. Obrigado.

Sim. Você pode ativar/desativar a animação na página Configurações.

Sim. Você pode ativar/desativar quase todos os blocos da página (produtos em destaque, apresentação de slides, banners, produtos relacionados, produtos recentes,...).

Sim, temos uma configuração para você alternar entre estas duas opções: Exibir ao passar o mouse e Exibir ao clicar.

O pacote de tema inclui fonte do tema, arquivos de design do Photoshop, dados de amostra e guia manual.

Isso não é um problema. Você só precisa modificar a proporção largura/altura nas configurações do tema.

Avaliações de Clientes

Utilizamos cookies para melhorar a sua experiência no nosso site. Leia sobre como usamos cookies em nossa Política de Privacidade. Ao navegar neste site, você concorda com o uso de cookies. política de Privacidade
aceitar

Seu carrinho

×