Esgotado
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92
Clique para ampliar
  • Montagem garantida

    Sempre a parte correta

  • Especialistas internos

    Conhecemos nossos produtos

  • Valor adicionado

    Montagem, Balanceamento

  • Entrega em todo o mundo

    Frete grátis em todas as encomendas

VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92

2 vendido no último 8 horas
VRSF
10903070
Fora de estoque
$479.99
RSF 5″ Performance HD & 7.5″ Competition HD Intercooler Upgrade Kit for your 2007 – 2012...
Guia de tamanho

os clientes estão visualizando este produto
VRSF Intercooler FMIC Upgrade Kit 07 – 12 135i, 335i, X1 N54 & N55 E82 E84 E90 E92

RSF 5″ Performance HD & 7.5″ Competition HD Intercooler Upgrade Kit

for your 2007 – 2012 BMW 135i, 335i & X1 N54 & N55 Powered BMW

Replace your overheated factory intercooler with the VRSF 5″ Performance HD & 7.5″ Competition HD Intercooler to get the most out of your N54 or N55. These intercoolers were designed to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. These intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

Intercooler Core

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heat soak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

We remedy this problem with our custom bar and plate cores which utilizes a staggered and offset high density internal and external fin pack. Our cores have been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.

The VRSF 5″ Performance HD is the best option available for stock turbo N54 and N55’s on the market. The 5″ features a much denser fin pack both internally and externally than comparable options. The stock BMW intercooler rises about 32 degrees during a 3rd gear pull whereas it’s not uncommon to see intake temperatures stay even at the end of a 3rd gear pull with the VRSF 5″ Performance due to the larger overall surface area.

The VRSF 7.5″ Competition HD FMIC utilizes the largest core of any 7″ intercooler available and is the best performing 7″ intercooler in it’s class. More importantly, the proprietary VRSF core offers a much denser, high destiny fin pack both internally and externally which translates to better heat absorption internally as well as heat dissipation externally without compromising airflow. Again, the OEM intercooler rises 32 degrees during a 3rd gear pull whereas it’s not uncommon to see intake temperatures drop at the end of a multiple gear pull due to the Competition HDs larger overall surface area.

Installation

The 7.5″ Competition HD intercooler kit includes everything you’ll need to replace your OEM intercooler with our upgraded kit. Due to the larger over all size of the size of the 7.5″ intercooler, the black plastic shroud does need to be trimmed. Also note that the bumper cover does not require trimming or removal for installation.

The 5″ intercooler kit also includes everything necessary to replace your OEM FMIC (front mount intercooler) with our upgraded kit. This is a bolt on intercooler which means it doesn’t require permanent modification in order to be installed. Also note that removal of the bumper is not required for installation.

Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models. Every VRSF product includes our lifetime warranty & our “No Hassle” satisfaction guarantee which includes fitment & defects.

Features

  • High density, bar and plate core
  • 5″ Performance HD features the highest density fin pack in it’s class
  • 7.5″ Competition HD features the largest 7″ core in it’s class
  • CFD engineered cast aluminum end tanks
  • Lower charge pipe, couplers, clamps and mounting hardware included.
  • Lifetime VRSF Warranty

Fits the following BMWs

2007 – 2013 E90/E91/E92/E93 BMW 335i & 335xi
2011 – 2013 E92 BMW 335is
2008 – 2013 E82 BMW 135i
2012 – 2015 E84 BMW X1 35i

Mostrar mais
Mostrar menos

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.

Política do retorno

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut brandit risus. Donec mollis nec Tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nastur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesco congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada famas ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proína em lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Mecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspender um nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Envio

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut brandit risus. Donec mollis nec Tellus et Rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nastur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesco congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada famas ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proína em lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Mecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspender um nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Use texto sobreposto para dar aos clientes uma visão sobre sua marca. Selecione imagem e texto relacionados ao seu estilo e história.

É sim.

Certifique-se de seguir as etapas abaixo:

1/ Baixe o pacote em themeforest.net (o arquivo está em formato zip)

2/ Extraia o arquivo que você acabou de baixar.

3/ Encontre este arquivo: ella-3.0.0-sections-ready.zip na pasta Ella Sections Ready 3.0.0, então você só precisa fazer upload do arquivo ella-3.0.0-sections-ready.zip para sua loja Shopify.

Para economizar seu tempo e entrar em contato com nosso suporte rapidamente, siga as etapas abaixo:

1/ Crie uma conta de equipe para nós (com permissão de Temas e permissão de Configurações) http://docs.shopify.com/manual/settings/account/staff-members

2/ Capture uma captura de tela ou vídeo do problema que você encontrou.

3/ Especifique qual modelo e versão você está usando.

4/ Descreva claramente como reproduzir o problema.

5/ Envie todas as informações (conta da equipe, captura de tela, vídeo, nome e versão do modelo, descrição dos problemas, link) para support@halothemes.com

Sim, iremos ajudá-lo a instalar o modelo, se necessário

Sim nós fazemos. Por favor, envie seus pedidos de personalização para support@halothemes.com , nós lhe daremos nosso orçamento. Obrigado.

Sim. Você pode ativar/desativar a animação na página Configurações.

Sim. Você pode ativar/desativar quase todos os blocos da página (produtos em destaque, apresentação de slides, banners, produtos relacionados, produtos recentes,...).

Sim, temos uma configuração para você alternar entre estas duas opções: Exibir ao passar o mouse e Exibir ao clicar.

O pacote de tema inclui fonte do tema, arquivos de design do Photoshop, dados de amostra e guia manual.

Isso não é um problema. Você só precisa modificar a proporção largura/altura nas configurações do tema.

Avaliações de Clientes

Utilizamos cookies para melhorar a sua experiência no nosso site. Leia sobre como usamos cookies em nossa Política de Privacidade. Ao navegar neste site, você concorda com o uso de cookies. política de Privacidade
aceitar

Seu carrinho

×